SM-5600 Out-line PCBA Cleaning Mahcine-Shenzhen SAM Electronic Equipment Co., Ltd.

All

All
Product Management
News and Information
Introduction content
Enterprise outlets
Frequently Asked Questions
Corporate Video
Company Portfolio

EN
- CN

Products

SM-5600 Out-line PCBA Cleaning Mahcine

Product Model:

SM-5600

Product Description

This cleaning machine is designed for surface cleaning of PCBs and PCBA assemblies used in the semiconductor and SMT industries. It employs the industry’s most advanced cleaning technology, ensuring 100% cleanliness while also protecting the environment. The cleaning machine consists of systems including cleaning, coarse rinsing, fine rinsing, drying, filtration, and wastewater treatment. Powered by electricity and compressed air, the machine requires manual placement of the PCBA boards (workpieces) into the cleaning chamber. After setting the desired durations and frequencies for cleaning, coarse rinsing, fine rinsing, and drying—as well as other relevant parameters—on the touch screen, simply press the start button, and the product will be automatically cleaned, coarsely rinsed, finely rinsed, and dried. The cleaning machine uses water-based cleaning solutions for primary cleaning and DI water for final rinsing. It poses no safety hazards and causes no harm to operators.

Product Details

Machine features:

1. High-pressure spray system specifically designed for cleaning PCBs/PCBAs and other components using water-based cleaning solutions.

2. Four liquid tanks equipped with a heating system to meet the requirements for cleaning, coarse rinsing, fine rinsing, and hot-air drying.

3. Process Flow: Cleaning – Chemical Isolation – Rinsing (Open-loop/Closed-loop) – Drying

4. Equipped with advanced, fully automatic touchscreen operation software; program files are saved, making operation extremely simple.

5. System counting function that automatically accumulates the number of PCB boards cleaned and the number of filter cycles.

6. Liquid and pump pressure can be displayed via the panel pressure gauge, providing timely feedback on the equipment’s operating status.

7. The cleaning pressure can be adjusted independently and is equipped with a visual window; adjust the pressure according to the PCB board’s cleaning requirements.

8. Monitor the conductivity of the rinsing solution to ensure cleanliness. The conductivity can be set to meet the process requirements of different PCB boards.

9. The all-stainless steel body is sturdy and durable, resistant to cleaning solutions such as acids and alkalis.

10. Rinsing is performed using an overflow method; the water from the final rinse overflows into the initial rinse tank, preventing any risk of recontamination.

11. High-pressure fan + hot-air drying for faster and more thorough drying results.

12. Lower operating costs—each cleaning cycle requires only 200–300 ml of liquid (varying slightly depending on the product). After cleaning is complete, residual liquid is directly recovered via pipelines and pumps, reducing liquid consumption by up to 40%.

Machine parameters:

Machine dimensions (mm)	1670 (L) × 1100 (W) × 1860 (H)	Delicate rinse tank volume	55L
Voltage	Three-phase 380V (three-phase five-wire)	Filter cartridge	0.2 μm
Total power	33KW	Cleaning basket size	500mm × 550mm × 100mm (upper and lower layers)
Rated current	50A	Cleaning time	0-10 min (adjustable)
Air source	0.4-0.6Mpa	Cleaning method	Spray washing – Spray pre-rinsing – Spray final rinsing – Air knife drying
Exhaust port	Φ125	Noise	Less than 50 decibels
Cleaning box volume	42L	Operation Control	PLC + Touch Screen (One-Button Start)
Initial rinse tank volume	28L